process of packing

英 [ˈprəʊses ɒv ˈpækɪŋ] 美 [ˈprɑːses əv ˈpækɪŋ]

压缩过程;紧缩过程

计算机



双语例句

  1. On Friday morning, as you begin the process of packing up to leave, a host, a myriad, a phalanx of problems, challenges and effluvia will fly up and hit you in the face.
    周五上午,当你开始整理行李准备离开时,一大堆的问题、麻烦和杂事都会迎面而来。
  2. To enforce the process of shipment& inspection, to improve the way of packing.
    加强产品过程、出货检验工作,改进包装方式。
  3. The equipment can shift without grades, a device of center lubricating is set in it. This kind of technological process can economize 7% of packing material than vertical wrapping process.
    该机采用无级变速。设有中心润滑装置。比起直式包装工艺,可节省包装材料7%。
  4. This paper discusses peculiarity, types and technics of production process of packing box to press tinplate, and analyses failure in production process.
    本文对马口铁在冲压制品中的特点、基本分类及生产工艺做了比较详细的论述;并对生产过程中常出现的缺陷及原因进行了分析。
  5. Except checking and accepting, storing and keeping, taking and supplying merchandise, the process of storage includes packing, processing in circulation, selecting and transportation.
    仓储活动除以商品入库验收,储存保管和出库供应为主外,还包括包装、流通加工、分拣、配送和运输等。
  6. The act, process, industry, art, or style of packing.
    包装,打包包装的动作过程、工业、艺术或样式。
  7. Process control of sealing mechanism and repair for valve packing
    阀门填料的密封机理和检修过程控制
  8. Phasic theory of the packing process and the characteristics of trim loss are applied to design the packing algorithm.
    针对基于传统定序规则的布局启发式算法,提出了布局过程的阶段性原理,分析了布局余量产生的方式及特点,并将这些原理与特点用于布局算法的设计之中。
  9. This paper analyzes the process and characteristics of making clip, describes the making process rules of the aluminum ingot packing clip, blemish existed and the solutions.
    分析制作卡子的工艺及其特点,论述铝锭包装卡子的制作工艺规程、存在的缺陷及解决方案。
  10. Static electricity is a hidden trouble for safety in the process of manufactory and packing of polypropylene by block polymerization.
    静电是本体法聚丙烯生产和包装过程中的安全隐患。
  11. Finally, the whole process of the multimedia data acquisition, buffering, packing and sending is introduced.
    最后,系统地介绍了整个多媒体数据从采集,经缓冲和打包处理,到成帧发送的过程和实现方法。
  12. An advanced quality management mode for automobile component part supply is introduced, which includes the control over all process of design, production, packing, delivery, etc.
    介绍了一种现代汽车制造厂对零部件供应商进行质量控制的先进管理模式,它包括对零部件的设计、生产、包装、交付等环节进行全面控制。
  13. The new process of heavy aromatics separation and the technique of high efficiency regular packing tower are introduced.
    介绍了重芳烃分离装置新工艺和高效规整填料塔技术。
  14. A design process of the LR6 blister packing machine was introduced.
    介绍了一种自行研制的LR6泡罩包装机的设计过程。
  15. Presents the designing process and operation of the packing system of shape-selective molecular sieve. The commercial application result shows that the designing calculation of the cooling packing system is accurate ard reliable, which results in obvious improvement of product yield, economic and social benefits.
    介绍择形分子筛包装系统的设计过程及运行情况,工业应用结果表明:冷却包装系统设计计算和选型准确可靠,产品收率、经济效益和社会效益显著提高。
  16. The technics process of the double-aluminium foil for filling and heat-sealing packing machine was analysed, and the control system was designed.
    本文对双铝箔自动填充热封包装机工艺过程进行了分析,对控制系统进行了设计。
  17. This paper introduces the development process of random packing. The method to change the performance of random packing through changing its configuration is analyzed.
    介绍了散堆填料的发展过程,分析了通过改变散堆填料的几何结构以改变填料性能的方法;
  18. There are many biological mechanics problems of fruit, vegetables and grain during the process of harvesting, processing, storing and packing, which contained mechanical damage and protecting measure of fruit and vegetables.
    水果、蔬菜及谷物等在收获、加工、贮藏、包装和运输过程中存在着许多生物力学问题,包括果蔬的机械损伤以及防护措施等。
  19. Four factors affecting the permeating process of sugar into vacuum packing bitter melon were studied and the traditional one was improved.
    从4个影响因素方面探讨了蜜汁苦瓜的真空渗糖工艺。
  20. According to the structure characteristics and operation conditions of the improved mellapak packing bed, the process of the mixing of gas stream in the packing bed was analyzed.
    根据桥孔填料结构的特点及操作因素,分析了气流在填料床内的混合过程,通过物料平衡计算,建立了描述气流分布的多参数的混合池数学模型。
  21. The microbial acclimation and the process conditions were studied. The results indicated that the period of packing biofilm was 10~ 14 d with surfactant modification, which shortened 14~ 18 d, compared to the activated carbon used in literatures.
    实验研究了该工艺的驯化挂膜情况和主要工艺条件,结果表明,天然斜发沸石和木屑改性后,驯化挂膜周期为10~14d,比文献中颗粒活性炭挂膜缩短14~18d。
  22. The corrosion mechanism of corundum tube furnace during the decarburization process of carburized hard alloy with MgO as the packing material
    以MgO做填料对渗碳硬质合金进行脱碳处理时刚玉炉管破坏机理的探讨
  23. It mainly introduced the algorithm based on the carrier point gas velocity by listing all of the equations, and showed the result of calculation based on the same process conditions under the circumstances of 30 different packing varieties and specifications.
    主要介绍以载点气速为基础的算法,列出了全部公式,并给出30种不同的填料品种和规格,按同样工艺条件进行计算的结果。
  24. Two columns rectification process and three columns rectification process were discussed in methanol rectification technology, the advantages of packing type rectifying column with high effective wire net corrugated packing and distributor were introduced, economy was compared for two columns rectification technology with the three columns rectification technology.
    论述了甲醇精馏技术中双塔和三塔精馏工艺,介绍了采用高效丝网波纹填料和分布器的填料型精馏塔的优点。对双塔和三塔精馏技术的经济性进行了比较。
  25. With pumpkin and as the main ingredients the packed instant pumpkin and carrot cookie is nutritious and healthy, The whole process consists of washing slicing, steaming, powder, shaping and packing of the ingredients.
    以南瓜、胡萝卜为主要原料,经清洗、切片、蒸煮、粉碎、成型、包装等工艺加工成即食营养保健南瓜胡萝卜饼。
  26. The New Adjustable Process of Separating& Adjustable Driving Transmission by Chain Delivery in Packing Machinery
    包装机分立可调试主传送链的新型调节机构
  27. New Process of Paper Bag Hot Packing of Coal Tar Pitch
    煤焦油沥青的纸袋热包装新工艺
  28. The treatment of hardly biodegradable organic wastewater is studied by using electro-oxidation process, which emphases on the influence of the electrode material, packing, tank voltage, space between the electrodes, reaction time on the efficiency of organism degradation in the research.
    采用电氧化法处理某化工厂难生化有机废水,重点考察了极板材料、填料、槽电压、极板间距、有效反应时间、pH值对难生化有机废水的处理效果的影响情况。
  29. Emotion factor is the important investigative object in the current design process; the emotion design is widely used in the process of packing design which uses the vehicle of visual information cognize.
    情感因素是当前设计过程中的重要研究对象,在以视觉信息认知为传达方式的商品包装中,情感设计得到较为广泛的应用。
  30. Through the CFD simulations, it is shown that in the process of distillation with countercurrent flow, the surfaces of traditional corrugated packing were not moistened by liquid due to the structural defect, and most of the liquid flow as streams in the packing channels.
    通过CFD模拟计算表明,在两相逆流的精馏过程中,传统的波纹填料由于结构缺陷表面大部分没有被液体流覆盖,液体在填料表面呈溪流流动。